GEWEFA DIN 69 871 Part 1 Form A SK(DIN40) 快换弹性扭力攻牙刀柄,无内冷孔
Quick-change tapping chuck with length compensation in compression and tension DIN 69 871 Part 1 Form A
Application: For the chucking of inserts for threading taps.
具备长度补偿及扭力保护功能, 能够补偿因主轴进给和螺纹牙距产生的偏差。配套筒夹型号:no. 05.055 and 05.056
Remark: Length compensation in compression and tension to compensate for any deviation between the rate of feed and the thread pitch.
Note: Inserts in line with art. no. 05.055 and 05.056
Bestell-Nr. Code No. | Kegel Taper | für Gewindebohrer for tap sizes | passender Einsatz Matching inserts | Längenausgleich Druck Zug Length compensation compression Tension | d1 | d2 | l1 | G | Gewicht kg Weight |
64.05.051.001 | SK 30 | M 3 – M 12 | 1 | 7,5 7,5 | 19 | 36 | 63,5 | M 12 | 0,5 |
64.05.051.002 | | M 8 – M 20 | 2 | 12,5 12,5 | 31 | 53 | 98,5 | | 1,0 |
| | | | | | | | | |
28.05.051.001 | SK 40 | M 3 – M 12 | 1 | 7,5 7,5 | 19 | 36 | 59 | M 16 | 1,1 |
28.05.051.002 | | M 8 – M 20 | 2 | 12,5 12,5 | 31 | 53 | 97 | | 1,5 |
28.05.051.003 | | M 14 – M 33 | 3 | 20 20 | 48 | 78 | 149 | | 3,3 |
28.05.051.004 | | M 22 – M 48 | 4 | 22,5 22,5 | 40 | 90 | 166 | | 4,6 |
| | | | | | | | | |
30.05.051.005 | SK 50 | M 3 – M 12 | 1 | 7,5 7,5 | 19 | 36 | 59 | M 24 | 3,0 |
30.05.051.006 | | M 8 – M 20 | 2 | 12,5 12,5 | 31 | 53 | 83 | | 3,3 |
30.05.051.007 | | M 14 – M 33 | 3 | 20 20 | 48 | 78 | 138 | | 5,2 |
30.05.051.008 | | M 22 – M 48 | 4 | 22,5 22,5 | 60 | 96 | 152 | | 6,5 |
30.05.051.009 | | M 33 – M 68 | 5 | 22,5 22,5 | 60 | 96 | 220 | | 8,2 |
| | | | | | | | | |