GEWEFA DIN 69893 HSK 快换攻牙刀柄，带扭力保护和长度补偿功能，带中心内冷孔 50BAR
Quick-change tapping chuck with length compensation with tension and compression with coolant feed DIN 69 893 HSK A
Application: For the chucking of inserts for threading taps.
长度补偿 主轴进给与螺距之间偏差。配套筒夹型号：No. 05.055,05.056, 05.057, 05.058, 05.255,
Note: Inserts in line with Code No. 05.055,05.056, 05.057, 05.058, 05.255,
| Bestell-Nr. Code No. | HSK-d | Gewinde d1 | Größe Size | d1 | d2 | l1 | l2 |
| 91.05.052.001 | HSK A 40 | M 3 – M12 | 1 | 19 | 36 | 110 | 90 |
| 92.05.052.001 | HSK A 50 | M 3 – M12 | 1 | 19 | 36 | 110 | 84 |
| 92.05.052.002 | M 8 – M20 | 2 | 31 | 53 | 154 | 128 | |
| 93.05.052.003 | HSK A 63 | M 3 – M12 | 1 | 19 | 36 | 110 | 84 |
| 93.05.052.004 | M 8 – M20 | 2 | 31 | 53 | 156 | 130 | |
| 93.05.052.005 | M14 – M33 | 3 | 48 | 78 | 228,5 | 202 | |
| 93.05.052.006 | M 33 - M 48 | 4 | 60 | 96 | 272 | 246 | |
| 94.05.052.001 | HSK A 80 | M 3 – M12 | 1 | 19 | 36 | 114 | 85 |
| 94.05.052.002 | M 8 – M20 | 2 | 31 | 53 | 161 | 131 | |
| 94.05.052.003 | M14 – M33 | 3 | 48 | 78 | 243 | 214 | |
| 95.05.052.006 | HSK A 100 | M 3 – M12 | 1 | 19 | 36 | 110 | 91 |
| 95.05.052.007 | M 8 – M20 | 2 | 31 | 53 | 163 | 134 | |
| 95.05.052.008 | M14 – M33 | 3 | 48 | 78 | 234 | 205 | |
| 95.05.052.009 | M 22 - M 48 | 4 | 60 | 96 | 272 | 246 | |
